saversspot.blogg.se

1. #Cetus3d set printer height raft install#
2. #Cetus3d set printer height raft manual#
3. #Cetus3d set printer height raft software#
4. #Cetus3d set printer height raft password#
5. #Cetus3d set printer height raft download#

For Z axis, use a screw drive to turn the adjustment screw at 1/4 turn steps on either direction. To re-calibrate the X and Y axis, first turn off the machine, then stick the calibration sticker on the stepper motor at indicated location below (if there is already a sticker, then remove it). This will result in axis hitting the endpiont continuously and produce a clunky noise. There is a chance that one or more axis cannot find their endpoints due to slight physical expansion/shrinkage of aixs during shipping. 3 Although the printer is pre-calibrated in factory. Manage the Cables Use the Plastic Cable Buckles on the back of the machine to manage cables. 1 2 3 4 5 Normal Set Layer Thickness Select Infill Type Select Print Quality/Speed Advanced Options 1 2 Activate Bind 4 3 3 COMPLIANCE RoHS Nozzle Wrench X-Axis Z-Axis Y-Axis INITIALIZE PRINTER Long press the front button to initialized the printer, the 3 axes of the printer will move to endpoint and stop. In the software, go to account section and login, click “ Activate ” to activate the machine. Go to the registered email and click the activation link. 3 Register your account including Username, Email and Password. 2 For a new user, click “Sign Up” to create a user account.

#Cetus3d set printer height raft software#

1 Select Account on the software main menu. ACTIVATE MACHINE We recommend you to register an account and active your printer to get fully access to functions of 3D printer. 5 Click “Print” to open the Printer Setting window. 4 The loaded model will appear on the Build Space.

#Cetus3d set printer height raft manual#

Z-Axis Y-Axis Extruder Unit X-Axis Build Platform Main Seat USB Connector Power Connector Power Switch Extruder Unit PLA Filament Sample 50g x 3 USB Cable Power Cable Build Plate Spare Screws Power Adapter Hex Key Plier Spool Holder Kits Calibration Sticker x 4 Scraper 0.2/0.4/0.6mm Nozzle Filament Guide Tube 1 2 3 Z-Axis Y-Axis Long Plug Short Plug 1 2 2 1 Nozzle Connector Account Back to Home Add a Model or Picture Print Initialize Calibration Maintenance Settings Share Skin Model Adjust- ment Wheel Build Space Too Low Just Right Too High Back Side Plastic Cable Buckle Mirror Delete Save Reset Move Scale View Wheel Menu Rotate Auto Place Undo Fix Errors Undo 2nd Level Menu 1 2 3 4 5 Current Nozzle Height Setting Value 1 4 0.30 5 0.00 6 0.00 9 0.00 8 0.00 7 0.10 Manual Auto Level Reset Nozzle Height 181 Move _ 0.00 _ _ Set Nozzle Detect Confirm Cancel 2 3 Manual Auto Level Reset Nozzle Height 181 Move _ 181.0 _ _ Set Nozzle Detect Manual Auto Level Reset Nozzle Height 181 Move _ 181.5 _ _ Set Nozzle Detect Paper LOAD AND PRINT A MODEL 1 Go to Add model “ + ”. When the printer buzz, insert the filament into the extruder unit gently.

#Cetus3d set printer height raft install#

5 Install the guiding tube, insert the filament into guiding tube. When the filament melting temperature is reached, the printer will buzz and begin to extrude. 2 Select the Material from the dropdown material list. For Example: If the nozzle position determined by the paper is 181.5, you have to set the nozzle height to 181.0 LOAD FILAMENT 1 Go to “Maintenance”. 5 Note the current nozzle height and deduct the value of it by 0.5mm and press “set” button to save the value as nozzle height (for printer with raft). At the correct height, the paper should be able to move freely but user should able to feel a small drag from the nozzle. 4 Put a paper in between the Nozzle and Platform, lower the nozzle and feel the drag be- tween paper and nozzle. 3 Use the + button to lower the Nozzle to close proximity of platform. 2 Press button 5 to move the Nozzle to the middle of the build platform. ADJUST THE NOZZLE HEIGHT 1 Go to “Calibration”.

#Cetus3d set printer height raft password#

5 Input the password for the Wi-Fi network Note: The computer and printer must be in the same WLAN (same SSID) before connecting. 4 Click the Network dropdown menu to select an available network. SETUP PRINTER 1 Click the Setting icon at the top right corner. Note: Initialization is required every time when the machine is powered on, this is in order to determine the correct position.

#Cetus3d set printer height raft download#

2 Connect the Extruder Connector to the Extruder Unit. Install the Extruder Head to the Y Axis 1 Mount the Extruder Unit on the Y-Axis with 2 screws provided on the linear bearing. (2) It is only need to install three screws. There is no need to level the build plate.

Note: (1) The device is pre-leveled in factory. Install Build Platform 1 Place the Build Platform on the Main Seat and align the three screw holes. 3 Plug the long plug into the socket on the Y-Axis. 2 Mount the Axis Assembly to the Main Seat with included screws.

Install the Axis Assembly to the Main Seat 1 Plug the short plug into the socket on the Z-Axis.